Alexandrines

Ну как-бы я себе вкинул из белки мотор от Г4 (тди), 20 тык пробег нормальный, масложер в норме, пульнуть дает :) если есть желание ...

Сейчас готовлю свап новый, на НФ, если есть желание, могу отдать свой ... :):):) на этой неделе скину как-раз ....

Синхро рычаг сзади :)

Кулаков там нет :)

 

А присрать 5 болтовые на синхро рычаги проблемно, кто знает?

очень

 

Так а в чем пятиболтовые ступицы в синхро присрать ??? Не могу понять :)

Вот, готовые решения, хоть под пять болтов, хоть под 4.

5 different setups:
Front 5x100, stock width, 02M gearbox
Front suspension: Golf Mk2, 5x100 hubs, ESC Tuning ES#1047, in G60 spindles
Driveshafts: Left Seat Ibiza TDI, part# 6Q0 407 271 J. Right shortened 4Motion, hollow type.
Front brakes: VR6 288, Audi TT or bigger bolt-on kits.
Prop shaft: Passat G60 middle section with 100mm CV, shorted TT item front and shorted G60 item rear.
Rear 5x100, stock width
Rear left driveshaft: G60 Syncro shaft, shortened, inner CV joints 4Motion, outer VR6
Rear right driveshaft: G60 Syncro shaft, shortened, inner CV joints 4Motion, outer VR6
Rear trailing arms: G60 Syncro
Rear hubs: VR6 Syncro, optional VR6 front hubs and 4Motion outer CV-joints
Rear brakes: VR6 Syncro

Front 5x100, wide track, 02M gearbox
Front suspension: Subframe from Golf Mk3 Gti 8v 16v VR6 / Corrado VR6, 5x100
Driveshafts: Custom driveshafts with 4Motion inner CV and Sharan outer CV. http://www.driveshaf...dex_content.cfm
Front brakes: Audi TT or bigger bolt-on kits
Prop shaft: Passat G60 middle section with 100mm CV and, shorted TT item front and shorted G60 item rear.
Rear 5x100, wide track, 4Motion outer CV joints
Rear left driveshaft: G60 Syncro shaft with CV joints from 4Motion
Rear right driveshaft: G60 Syncro shaft with CV joints from 4Motion
Rear hubs: 5x100 VR6 front hubs
Rear brakes: stock VR6 Syncro
Rear trailing arms: VR6 Syncro

Front 5x100, wide track, 02C / 02J gearbox
Front suspension: Subframe from Golf Mk3 Gti 8v 16v VR6 / Corrado VR6, 5x100
02J 4Motion (from 2000) or 02C gearbox, optional upgraded internals.
Skoda Angle Drive, part# 02C 409 053M.
Driveshafts: Stock VR6 Syncro with Sharan outer CV
Front brakes: Audi TT or bigger bolt-on kits
Prop shaft: Stock G60 Syncro with optional 100mm CV's from Audi TT
Rear 5x100, wide track
Rear left driveshaft: G60 Syncro shaft with CV joints from 4Motion
Rear right driveshaft: G60 Syncro shaft with CV joints from 4Motion
Rear hubs: 5x100 VR6
Rear brakes: stock VR6 Syncro
Rear trailing arms: VR6 Syncro


Front 4x100, stock width, 02C / 02J gearbox
Front suspension: Golf Mk3, 4x100
02J 4Motion (from 2000) or 02C gearbox, optional upgraded internals.
Skoda Angle Drive, part# 02C 409 053M.
Driveshafts: Stock G60 Syncro
Front brakes: G60 280 mm, optional S2 callipers. 305 mm. Brembo from Seat Ibiza Cupra R
Prop shaft: Stock G60 Syncro, optional 100 mm CV's from Audi TT
Rear 4x100, stock width
Rear left driveshaft: G60 Syncro shaft, shortened, with inner CV joints from 4Motion
Rear right driveshaft: G60 Syncro shaft, shortened, with inner CV joints from 4Motion
Rear trailing arms: G60 Syncro
Rear hubs: G60 Syncro
Rear brakes: G60 Syncro

Front 4x100, wide track, 02C / 02J gearbox
Front suspension: Subframe from Golf Mk3, 4x100
02J 4Motion (from 2000) or 02C gearbox, optional upgraded internals.
Skoda Angle Drive, part# 02C 409 053M.
Driveshafts: Stock Mk3 Syncro
Front brakes: G60 280 mm. Optional S2 callipers, 305 mm. Brembo from Seat Ibiza Cupra R
Prop shaft: Stock G60 Syncro with optional 100mm CV's from Audi TT
Rear 4x100, wide track
Rear left driveshaft: G60 Syncro shaft, with inner CV joints from 4Motion
Rear right driveshaft: G60 Syncro shaft, with inner CV joints from 4Motion
Rear trailing arms: Golf 3 Syncro
Rear hubs: G60 Syncro
Rear brakes: G60 Syncro

2.0 CDI

Хотя, 1.9 встанет бех каких либо переделок по кузову, а вот 2.0 прийдется строгать и пилить немного :)

Так может тогда в него свапнуть что посвежее от Г3/Г4 ?